- Model# Manual Warranty Multimedia; CD/MP3; DUB Amps; DUB Speakers; DUB Subs; Amps; Speakers; Accessories. Add-on Navigation; Connectivity; Brand History.
- Installation and Operation Manual video. i CONTENTS Thank you for choosing a Jensen product. Congratulations on your purchase of the Jensen VM9412.
- Find the user manual you need for your TV and more at ManualsOnline. Jensen VM9412 Flat Panel Television User Manual. Installation and Operation Manual. video.
VM9412 Installation and Operation Manual BAND AS Multimedia Receiver DISP CLOSE ANGLE / TILT PICTURE BAND AS WIDE DISP OPEN Press Audio Enter VM9412 PTY SRC REAR RPT SCN RDM STOP MUTE DIV ® video 160 Watts Peak Watts en Crête Vatios el Máximo 40W x 4 CONTENTS Thank you for choosing a Jensen product. We hope you will find the instructions in this owner’s manual clear and easy to follow. If you take a few minutes to look through it, you’ll learn how to use all the features of your new Jensen VM9412 Mobile Multimedia Receiver for maximum enjoyment. Preparation............................................................................................................................ 1 Installation ............................................................................................................................. 5 Anti-Theft Feature ................................................................................................................. 6 Controls and Indicators ......................................................................................................... 7 Remote Control ..................................................................................................................... 9 Using the TFT Monitor ........................................................................................................ 12 Operating Instructions ......................................................................................................... 14 Multi-ZONE Operation......................................................................................................... 15 Setup Menu......................................................................................................................... 16 Tuner Operation .................................................................................................................. 18 Satellite Radio Operation .................................................................................................... 20 DVD/VCD Video Operation ................................................................................................. 22 DVD/CD Audio Operation ................................................................................................... 25 MP3/WMA/iPod Operation .................................................................................................. 26 Troubleshooting .................................................................................................................. 29 Specifications ...................................................................................................................... 32 i ii VM9412 PREPARATION Congratulations on your purchase of the Jensen VM9412 Mobile Multimedia Receiver. It’s a good idea to read all of the instructions before beginning the installation. We recommend having your Jensen VM9412 installed by a reputable installation shop. • RCA Audio/Video Input Chassis • 1.0 DIN (Import/ISO-DIN Mountable) • Motorized/Swivel Flip-Out/Flip-Up LCD Screen • 7" TFT Active Matrix LCD with Anti-Glare Coating • Screen Tilt/Angle Adjustment • Heat Management System - Forced-Air Cooling to Keep the Chip-Sets Operating at Nominal Temperatures General • Navigation Ready (NAV101 Only) • 38-Key Infrared Remote Control with 5-Way Joystick • Two Composite Video Outputs for Additional Screens • Compatible with MZ7TFT Rear Seat Monitors with Touch Screen Interface • Two Audio/Video Auxiliary Inputs • 100-Ohm Preamp Line Output - All Audio Channels • 4VRMS Line Output - All Channels • Rotary Encoder Audio Control • Seven-Band EQ with Eight Preset EQ Curves • Spectrum Analyzer • Front, Rear, Center and Subwoofer Line Output • Subwoofer Crossover and Phase Control • Dolby Digital/Pro-Logic ll • Programmable Volume Control • Rear Camera Input (Normal and Mirror Image View) • Auto TFT Dimmer • 5-Way Joystick Optional Accessories • jLinkCable - iPod interface Cable Features DVD • Aspect Ratio - Full, Normal and OFF • Fast Forward - 2X, 4X, 8X and 32X • Slow Motion - 1/2, 1/4, 1/6 and 1/7 • Play, Pause, Stop, Next Chapter and Previous Chapter • ESP - 2MB Buffer CD / MP3 / WMA • ID3 Tag Compatible • Directory Search • Direct Track Access via Remote control • Burn Up To 1500 MP3 / WMA Files onto a DVD+R/RW • Audible Forward / Reverse Track Search • Random, Repeat and Intro • Play, Pause, Stop, Next Track and Previous Track • ESP - 2MB Buffer AM-FM • USA/Europe/Latin America/Asia Frequency Spacing • 30 Station Presets (18 FM, 12 AM) • Auto Stereo/Mono • Local/Distance • Auto Store/Preview Scan • RDS (Radio Data System) Sat Radio Ready • Compatible with XM and Sirius Tuners (Sold Separately) • Requires XMDJEN100 or JXMC Cables (Sold Separately) • Satellite Channel Name, Artist, Song and Categories Displayed on TFT Screen iPod • jLinkDirect - High Speed Direct Connect Interface to Access iPod Playlists, Artists, Albums, Songs, **Photos and **Video (** Requires Photo or Video iPod) • Power Management Charges iPod while Connected • Requires jLinkCable (Sold Separately) MediaLink3 • Under Dash Interface Allows Portable Media Devices to be Connected • MediaLink3 Includes the following connectivity: • jLinkDirect 8-pin DIN for iPod • 3.5mm Audio Only Input 1 VM9412 Optional Equipment • NAV101 The VM9412 is "navigation ready." Before accessing any navigation features, you must purchase and install the NAV101 module. All installation and operating instructions will be included with the NAV101 navigation module. Once the NAV101 is connected and operating properly, the NAV source mode will become active. While the NAV101 is not installed, the NAV option appears gray, indicating the function is not available. Rear Camera The VM9412 is "camera ready." Before accessing any camera features, you must purchase and install a rear video camera. Once the rear camera is connected and operating properly, the CAMERA source mode will become active. While the camera is not installed, the CAMERA option appears gray, indicating the function is not available. Satellite Radio Tuner See “Satellite Radio Operation” on page 20. iPod See “MP3/WMA/iPod Operation” on page 26. Tools and Supplies You will need these tools and supplies to install your VM9412: • • • • • • • • • Torx type, flat-head and Philips screwdrivers Wire cutters and strippers Tools to remove existing radio (screwdriver, socket wrench set or other tools) Electrical tape Crimping tool Volt meter/test light Crimp connections 18 gauge wire for power connections 16 – 18 gauge speaker wire WARNING! Only connect the unit to a12-volt power supply with proper grounding. WARNING! Never install this unit where operation and viewing could interfere with safe driving conditions. • WARNING! To reduce the risk of a traffic accident (except when using for rear view video camera) never use the video display function while driving the vehicle. This is a violation of federal law. Disconnecting the Battery To prevent a short circuit, be sure to turn off the ignition and remove the negative (-) battery cable prior to installation. NOTE: If the VM9412 is to be installed in a car equipped with an on-board drive or navigation computer, do not disconnect the battery cable. If the cable is disconnected, the computer memory may be lost. Under these conditions, use extra caution during installation to avoid causing a short circuit. WARNING! Never disassemble or adjust the unit. WARNING! To prevent injury from shock or fire, never expose this unit to moisture or water. • • WARNING! Never use irregular discs. Optional Accessories • jLinkCable - iPod interface Cable WARNING! To prevent damage to the mechanism inside this unit, avoid impact to the TFT monitor. WARNING! Using an improper fuse may cause damage to the unit and result in a fire. WARNING! The monitor employs an automatic motorized mechanism. To prevent damage to the core mechanism, please do not push, pull or swivel the monitor manually, other than in the manner explained in “Monitor Left/Right Angle Adjustment” on page 12. 2 VM9412 WIRING DIAGRAM the MediaLink and Satellite Connections diagram for more information * See about connecting a satellite receiver and an iPod (through the MediaLink). BLUE SUB.W MediaLink Bus SAT Radio WHITE SAT L * Satellite Receiver Connections RED External Power Amplifier FRONT R SAT R RED WHITE FRONT L YELLOW YELLOW RED REAR R AUX IN 1 WHITE WHITE WHITE REAR L RED RED *MediaLink YELLOW YELLOW External AV System AUX IN 2 WHITE WHITE RED Antenna Jack RED Rear Video 1 YELLOW VIDEO OUT 1 NAV101 Input YELLOW Antenna Auto antenna control (connect to antenna control lead & power supply of antenna amplifier) Harness Cord VIDEO OUT 2 Rear Video 2 BLACK BLUE ANT.CONT MZ-TFT MZ-TFT Touch Screen (Sold Separately) WHITE HEADPHONE MULTIZONE External power amplifier control BLUE/WHITE P.CONT Car Phone Car Mute (leave open if not connected) BROWN MUTE RED WIRELESS HEADPHONE (OPTIONAL) YELLOW CAMERA Rear View YELLOW Video Camera FRONT L+ FRONT L- FRONT L WHITE + WHITE/BLACK GREY + GREY/BLACK PURPLE + PURPLE/BLACK GREEN + PINK GREEN/WHITE RED ACC PARKING BRAKE PRK SW REVERSE + REVERSE + FRONT R+ FRONT RREAR R+ REAR RREAR L+ REAR L- FRONT R ACC Ignition Switch REAR R YELLOW BATT BATTERY + FUSE (15A) REAR L GREEN/BLACK - BLACK GND BATTERY Ground Battery 3 VM9412 MEDIALINK AND SATELLITE CONNECTIONS To Head Unit SAT Radio SAT L SAT R *SAT Cable Kit: JXMC or XMDJEN100 (sold separately) MediaLink **XM or Sirius satellite tuner (sold separately) 3.5mm - Audio VIDEO LEFT RIGHT ** * iPod Video iPod iPod Mini iPod Nano jLink iPod Cable (Sold Separately) 4 VM9412 INSTALLATION Pre-installation 1. Press the metal levers on both sides to remove the halfsleeve from the radio. PREPARE RADIO CAUTION! Be careful not to damage the car wiring. 3. Place the radio in front of the dashboard opening so the wiring can be brought through the mounting sleeve. FINAL INSTALLATION 5 4 Wiring Complete wiring as illustrated in the wiring diagram on page 3. Once the wiring is complete, reconnect the battery negative terminal. If there is no ACC available, connect the ACC lead to the power supply with a switch. BAND AS Pres s Audio 1 2 941 2 SRC REAR RPT SCN PTY VM BAND AS Pres s Aud io VM 9412 SRC REA R RPT SCN PTY DISP OPEN RDM STO P MUTE Ente r NOTE: When replacing a fuse, be sure to use correct type and amperage to avoid damaging the radio. The VM9412 uses one 10 amp mini-ATM fuse, located in the black filter box in-line with the main wire harness. DISP OPEN RDM STOP MUTE Enter 3 Final Installation 2. Install the half-sleeve. a. Install adapter if necessary (optional). b. Install half-sleeve into adapter or dashboard (use only the supplied screws). Do not force the sleeve into the opening or cause it to bend or bow. c. Locate the series of bend-tabs along the top, bottom and sides of the mounting sleeve. With the sleeve fully inserted into the dashboard opening, bend as many of the tabs outward as necessary so that the sleeve is firmly secured to the dashboard. d. Install support strap to make the unit more stable. After completing the wiring connections, turn the unit on to confirm operation (ignition switch must be on). If unit does not operate, recheck all wiring until problem is corrected. Once proper operation is achieved, turn off the ignition switch and proceed with final mounting of the chassis. 1. 2. 3. Connect wiring adapter to existing wiring harness. Connect antenna lead. Carefully slide the radio into the half-sleeve, making sure it is right-side-up, until it is fully seated and the spring clips lock it into place. Final ISO-DIN Installation 1. 2. 3. 4. Remove trim ring. Mount factory brackets on new radio using existing screws from old radio. Slide radio chassis into dash opening and secure. Reinstall dash panel. FINAL ISO-DIN INSTALLATION INSTALL HALF SLEEVE NOTE: For proper operation of the CD/DVD player, the chassis must be mounted within 20° of horizontal. Make sure the unit is mounted within this limitation. BAND AS Pres s Audio 3 4. Attach one end of the perforated support strap (supplied) to the screw stud on the rear of the chassis using the hex nut provided. Fasten the other end of the perforated strap to a secure part of the dashboard either above or below the radio using the screw and hex nut provided. Bend the strap to position it as necessary. VM9 412 SRC REAR RPT SCN PTY DISP OPEN RDM STOP MUTE Enter 2 1 4 CAUTION! The rear of the radio must be supported with the strap to prevent damage to the dashboard from the weight of the radio or improper operation due to vibration. 5. Replace any items you removed from the dashboard. 5 VM9412 ANTI-THEFT FEATURE The VM9412 is equipped with an anti-theft feature requiring the user to enter a password upon initial power on. The default user password is 012345 (6 digits). To change the anti-theft and RATINGS protection password, perform the following steps: 1. Press the SETUP button (31) on the remote control or touch the button on the screen to enter the “SETUP” menu. Touch RATINGS to view the “RATINGS” sub-menu. The small "lock" icon will be “unlocked”. Enter a new 6-digit password and press ENTER. The "lock" icon will lock and the new anti-theft password will be set, as well as the password for RATINGS protection (see “Rating Sub-menu Features” on page 17). NOTE: If you forget your password, contact Customer Service at 1-800-323-4815 for assistance. 2. 3. 6 VM9412 CONTROLS AND INDICATORS Button Operation 1. OPEN/CLOSE Press to activate the automatic mechanical system and move the TFT monitor into viewing position. Press again to close the TFT. 2. DISP Press to cycle through information available on the LCD screen. 3. AS Press to automatically store the first six strong stations in preset memory. Applies to current band only. 4. BAND Press the BAND button to change the AM, FM or SAT band. 5. AUDIO Rotate to adjust the volume. Press to enter and/or confirm audio settings. 6. SRC Press to select playing mode. 7. LCD Display 8. MUTE Press to silence the receiver. Press again to resume previous volume level. NOTE: The VM9412 features Softmute, which will allow the volume to increase or decrease gradually when the MUTE function is activated or deactivated. 9. IR Remote Control Receiver 10. (left joystick) DVD/Disc Mode: Press once to play back the previous chapter/track. TUNER Mode: Press once to auto-search for the previous available radio station. MENU Mode: Press once to move the cursor to the left. 11. (down joystick) DVD/Disc Mode: Press once for slow forward/slow reverse. TUNER Mode: Press to go down one frequency step. MENU Mode: Press once to move the cursor down. 12. Reset Press to reset system settings to factory default (except the password and parental lock setting). Press Audio Enter 4 3 7 2 1 BAND AS DISP OPEN 16 15 5 VM9412 PTY SRC REAR RPT SCN RDM STOP MUTE 14 13 9 6 18 19 20 21 22 8 10 11 12 7 VM9412 CONTROLS AND INDICATORS 13.Pause/Play/Enter Press to pause or resume playback or to confirm current selection. 14. (right joystick) DVD/Disc Mode: Press once to enter the next chapter or track. TUNER Mode: Press once to auto-search the next available radio station. MENU Mode: Press once to move the cursor to the right. 15. (up joystick) DVD/Disc Mode: Press once for fast forward/fast reverse. TUNER Mode: Press to go up one frequency step. MENU Mode: Press once to move the cursor up. 16. ( ) Press once for disc insertion/ejection. Press and hold to reset core mechanism position. 17. TFT Display 18. REAR Select rear zone source. Allows front passengers to listen to the radio while rear passengers listen to a CD, MP3, WMA or watch DVDs. 19. RPT Press to control repeat playback function. 20. SCN Press to initiate Preview Scan. 21. RDM Press to control Random playback function. 22. STOP Radio Mode: Stop AS/PS/Seek procedure. DVD/Disc Mode: Press the first time to pause playing. Press the second time to stop playing and return to the first track/chapter of the disc. 23. WIDE Press to adjust the display aspect of the picture to one of two settings: Full or Normal. 24/25. ANGLE/TILT Press to activate the tilt function. Use the joystick to make adjustments while the red tilt icon is flashing. Press once to adjust the downward tilt angle of the screen one step at a time or press and hold to adjust the angle in a continuous motion. Press Audio Enter ANGLE / TILT PICTURE 4 3 7 2 1 BAND AS Multimedia Receiver DISP CLOSE 17 25 24 23 BAND AS WIDE DISP OPEN 16 15 5 VM9412 PTY SRC REAR RPT SCN RDM STOP MUTE 14 13 9 6 18 19 20 21 22 8 10 11 12 8 VM9412 REMOTE CONTROL The VM9412 Remote controls both the front and rear zones. To switch from front to rear zone, move the F/R switch (32) located on the right side of the controller. 30 8 4 31 16 17 15 2 3 1 11 5 12 23 25 21 27 35 14 18 19 32 22 13 9 24 28 20 10 29 26 6 7 34 33 NOTE: Your remote control may differ slightly from the one pictured here. The above diagram is for illustrative purposes only. 9 VM9412 Table 1: Remote Control Functions Button Name MENU TITLE MUTE POWER/ AUDIO RPT A-B RPT SRC SUBTITLE DISP/ CLEAR Function Ref# 1 2 3 4 5 6 7 8 9 10 DVD Enters the main menu of the disc Enters the title menu of the disc Toggles on/off audio output Turns the power on/off Changes the audio language for disc playback Setup to repeat playback from time frame A to time frame B Repeats playback of current chapter Selects playing mode Language selection for subtitle Displays playing information/ Delete entry or move backwards to correct error in Direct Access mode VCD Turns on/off PBC when playing VCD Plays first ten seconds of each chapter/title Toggles on/off audio output Turns the power on/off TUNER CD/MP3 SATELLITE Displays diagnostics screen Category list in CG mode iPod Toggles on/off audio output Turns the power on/off Toggles on/off audio output Turns the power on/off Toggles on/off audio output Turns the power on/off Toggles on/off audio output Turns the power on/off Selects iPod Music mode Setup to repeat playback from time frame A to time frame B Repeats playback of current chapter Selects playing mode Selects playing mode Repeats playback of current track Selects playing mode Selects playing mode Repeats playback of current track Selects playing mode Selects iPod Photo mode Displays playing information/ Delete entry or move backwards to correct error in Direct Access mode Zooms in Zooms out Plays back Picture CD with different angle (if available) of picture displayed Fast forwards the disc content Decreases volume Increases volume Selects the previous chapter for playback ENTER, Pauses playback/ starts playback Selects the next chapter for playback Stops playback Enters Direct Access mode Fast reverses the disc content Play/pause Selects AM/FM Band. Enters Direct Access mode Decreases volume Increases volume Searches an available radio station by decreasing tuning frequency Auto memory scan Delete entry or move backwards to correct error in Direct Access mode Delete entry or move backwards to correct error in Direct Access mode Delete entry or move backwards to correct error in Direct Access mode Delete entry or move backwards to correct error in Direct Access mode PRESET PRESET ANGLE 11 12 13 Zooms in when playing DVD, DivX or Photo Zooms out when playing DVD, DivX or Photo Plays back disc in different angle (if available) for a scene Fast forwards the disc content Decreases volume Increases volume Selects the previous chapter for playback ENTER, Pauses playback/ starts playback Selects the next chapter for playback Stops playback Enters Direct Access mode Fast reverses the disc content Play/pause Navigates the preset station list Navigates the preset station list Switches MEM keypad off Navigates list window Navigates list window Navigates the preset station list Navigates the preset station list Switches MEM keypad off Navigates list window Navigates list window Selects iPod Video mode Joystick /\\ VOL VOL + Joystick < 14 15 16 17 Fast forwards the disc content Decreases volume Increases volume Selects the previous track for playback ENTER, Pauses playback/ starts playback Selects the next track for playback Stops playback Enters Direct Access mode Fast reverses the disc content Play/pause Selects SAT1, SAT2 or SAT3 band. Enters Direct Access mode Decreases volume Increases volume Searches an available radio station by decreasing tuning frequency ENTER, Toggles the onscreen menu between CAT/ CH mode Searches an available radio station by increasing tuning frequency Accesses iPod Menu Decreases volume Increases volume Pauses playback/starts playback ENTER Joystick (press) Joystick > 18 19 Searches an available radio station by increasing tuning frequency Selects the next track for playback 20 GOTO Joystick \\/ ||>/BAND 21 22 23 Enters Direct Access mode Play/pause 10 VM9412 Table 1: Remote Control Functions Button Name PIC OPEN/ CLOSE TILT TILT WIDE 1, 2, 3, 4, 5, 6, 7, 8, 9, 0 (Numeric Keypad) PIP SETUP F/R RDM SCN EJECT Function Ref# 24 25 26 27 28 29 DVD Displays Brightness/Contrast Controls Opens/closes the TFT monitor Decreases monitor tilt angle Increases monitor tilt angle Selects display mode: CINEMA, NORMAL or Standby Directly accesses chapter VCD Displays Brightness/Contrast Controls Opens/closes the TFT monitor Decreases monitor tilt angle Increases monitor tilt angle Selects display mode: CINEMA, NORMAL or Standby TUNER Displays Brightness/Contrast Controls Opens/closes the TFT monitor Decreases monitor tilt angle Increases monitor tilt angle Selects display mode: CINEMA or Standby 1-6 selects preset for current band CD/MP3 Displays Brightness/Contrast Controls Opens/closes the TFT monitor Decreases monitor tilt angle Increases monitor tilt angle Selects display mode: CINEMA or Standby Directly accesses track SATELLITE Displays Brightness/Contrast Controls Opens/closes the TFT monitor Decreases monitor tilt angle Increases monitor tilt angle Selects display mode: CINEMA or Standby 1-6 selects preset for current band iPod Displays Brightness/Contrast Controls Opens/Closes the TFT monitor Decreases monitor tilt angle Increases monitor tilt angle Selects display mode: CINEMA or Standby 30 31 32 33 34 35 Picture In Picture view of existing video Displays Setup menu F controls front zone R controls rear zone Plays all chapters in random order Picture In Picture view of existing video Displays Setup menu F controls front zone R controls rear zone Displays Setup menu F controls front zone R controls rear zone Displays Setup menu F controls front zone R controls rear zone Plays all tracks in random order Preview scan Plays the first ten seconds of each track Ejects disc Preview scan Ejects disc Displays Setup menu F controls front zone R controls rear zone Picture In Picture view of existing video Displays Setup menu F controls front zone R controls rear zone Plays all tracks in random order Ejects disc Ejects disc Ejects disc Ejects disc 11 VM9412 USING THE TFT MONITOR Open/Close TFT Monitor Open TFT Monitor Press the OPEN button (1) on the front panel or press the ( ) button (25) on the remote control to activate the mechanism that moves the display panel into the viewing position. Close TFT Monitor Press the OPEN button (1) on the front panel or press the ( ) button (25) on the remote control to load the display panel back into the compartment. Monitor Left/Right Angle Adjustment To manually adjust the left/right angle of the TFT screen, follow these steps: 1. Make sure the TFT screen in “Out”. Press the OPEN button (1), if necessary. Extender Mechanism - Closed Extender Mechanism - Fully Extended Aspect Ratio Press the WIDE button (28) on the remote control or WIDE button (23) on the monitor to adjust the aspect ratio as follows: TFT Monitor Auto Open If “TFT Auto Open” is “on” when the unit is turned on, the monitor automatically moves to the viewing position. If “TFT Auto Open” is ”off” when the unit is turned on, press the OPEN button (1) or ( ) button (25) on the remote control to move the monitor into the viewing position. If “TFT Auto Open” is set to ”Manual”, the TFT will not close when the key is turned off. 2 CINEMA The entire screen is extended horizontally to the aspect ratio of 16 to 9. The extension ratio is the same at any point. NORMAL The conventional display image has a 4 to 3 ratio of horizontal to vertical, leaving a blank area on the right and left sides of the display. STANDBY Screen becomes black. Touch screen to resume. Monitor Tilt Angle Adjustment A known characteristic of LCD panels is the quality of the display in relationship to the viewing angle. The monitor angle can be adjusted for optimum viewing using one of the following methods. Step by Step Angle Adjustment Press the ( ) or ( ) button on the remote control to adjust the tilt angle of the screen one step at a time. Continuous Angle Adjustment Press and hold the ( ) or ( ) button on the remote control to adjust the tilt angle in a continuous motion. 4 Image Setting 2. 3. 4. Locate the extender mechanism behind the screen. Firmly grasp both sides of the screen near the bottom. Gently pull on either the left or right side until the extender mechanism becomes fully extended. Table 2 shows the video output mode for each playing source. Table 2: Video Output Modes Reverse Driving Use If the rear-view video camera is connected, the unit is on, and the monitor is stationed inside the main compartment of the unit, the monitor automatically moves into the viewing position and switches to CAMERA mode upon reverse driving. When the reverse driving stops, the monitor returns to the main storage compartment. If the monitor is in display mode, the monitor automatically switches to CAMERA mode upon reverse driving. When the reverse driving stops, the monitor returns to its original input mode. Playing Source AM/FM TUNER SAT TUNER iPod DVD/Disc AUX IN NAV CAMERA Video Output Modes RGB Mode RGB Mode RGB Mode RGB Mode CVBS Mode RGB Mode CVBS Mode *CVBS – Composite Video Baseband Signal 12 VM9412 Parameter Adjustment Procedure 1. Enter Picture Quality Setting Mode: Press the PIC button (24) on the remote control or the WIDE/PICTURE button (23) on the monitor. 2. Select Item to Set: Use the up/down joystick buttons to select “BRIGHT” or “CONTRAST”. 3. Set Parameters: Use the left/right joystick buttons to modify the settings. 4. Exit Picture Quality Setting Mode: Press the PIC button on the remote control or the WIDE/ PICTURE button on the monitor Monitor Movement Mechanism If an obstruction occurs in the monitor path, the following protective measurements can be executed to prevent damage to the mechanism or monitor: Table 3: Monitor Protective Measures Obstruction Monitor loading out horizontally Monitor loading in horizontally Monitor loading out vertically Monitor loading in vertically Self Protection Unit stops at obstruction point Unit stops at obstruction point Unit stops at obstruction point Unit stops at obstruction point OPEN Button Pressed Monitor fully extended horizontally Monitor fully extended horizontally Monitor swivels back to the unit Monitor swivels back to the unit Power Reconnected Monitor is automatically loaded into unit Monitor is automatically loaded into unit Monitor swivels back to the unit Monitor swivels back to the unit Parking Brake Parking Brake Inhibit When the pink "Parking" wire is connected to the vehicle brake switch, the front TFT monitor will display video only when the parking brake sequence is engaged. Before starting the parking brake sequence, the radio must be on with the video media disc inserted and playing. Parking Brake Sequence There are two situations that can start the Parking Brake Sequence (this is the preferred method). The timing window is between 3 ~ 5 seconds. • Parking brake is engaged (on) when the vehicle is started or the accessory/ignition is turned on. To activate video, the following sequence of events must be completed: a. Release parking brake for 3 ~ 5 seconds. b. Reapply parking brake. c. Video should be displayed on the TFT monitor within 1 ~ 2 seconds. Parking break is disengaged (off) when the vehicle is started or the accessory/ignition is turned on. To activate video, the following sequence of events must be completed: a. Set parking brake for 3 ~ 5 seconds. b. Release parking brake for 3 ~ 5 seconds. c. Reapply parking brake. d. Video should be displayed on the TFT monitor within 1 ~ 2 seconds. After the protective procedure is executed, normal operation is resumed by pressing the OPEN button (1) or disconnecting and reconnecting the power. • 13 VM9412 OPERATING INSTRUCTIONS Power On / Off Press the /SRC button (6) on the unit (or the /POWER button (4) on the remote control) to turn the unit on. The buttons on the front of the unit light up and the current mode status appears in the LCD (7). You can also turn on the unit by pressing the OPEN button (1) and opening the TFT screen. Press and hold the button to power off the unit.The monitor is drawn back into the main compartment. CAMERA and NAV. The playing mode is displayed on the TFT and LCD screens. Auxiliary Devices External peripheral devices can be connected to this unit via RCA output or MediaLink . Select “AUX1” or “AUX2” mode to access and control connected auxiliary devices. Source Menu To access the SOURCE MENU, touch the TFT screen in the top left corner of the screen. Acoustic Urban Rave Latin Dance Hip Hop Rock FAD-BAL Use this screen to adjust the output level for each speaker in your surround system from 0 to -24dB. You can also adjust the master volume from this screen. 3 Table 4: Audio Adjustments Function EQ User Adjustment Options In user mode, you can manually adjust each of the seven frequency bands. Use the on-screen arrows to select a predefined equalization curve. Audible Beep Confirmation An audible beep tone confirms each function selection. The Beep tone can be disabled through the Setup menu. DISC SOURCE MENU F R O N T R E A R Volume Adjustment To increase or decrease the volume level, turn the rotary encoder (5) on the front panel or press the VOL+/ VOLbuttons (15, 16) on remote control. When the volume level reaches “0” or “40”, a beep sounds, indicating that the adjustment limit has been reached. The volume ranges from “0” to “40”. The LCD or TFT screen displays the volume level for 3 seconds. Programmable Turn-On Volume This feature allows the user to select a turn-on volume setting regardless of the volume setting prior to turning the unit off. To program a specific turn-on volume level, turn the AUDIO control (2) to adjust the volume to the desired turn-on volume. Push and hold the AUDIO button while the yellow speaker icon and level indication is displayed on the screen. The unit will beep two times to confirm your turn-on volume setting. DISC RADIO NAV iPod SAT CAMERA NOTE: The EQ mode will automatically change to “USER” when individual EQ bands are adjusted. Proper setting of the Fader and Balance complement the effects of the cabin equalizer. The Audio menu will automatically exit after a few seconds of inactivity. To exit quickly, touch the top left corner of the screen or press and hold the AUDIO button (5). OFF AUX 1 AUX 2 This menu allows you to select a source for the front or rear zone. Touch FRONT or REAR to choose the zone for which you would like to specify the source. (See “Multi-ZONE Operation” on page 15.) System Reset To correct a system halt or other [RESET] Button illegal operation, use the tip of a pen to press the reset button (12) located on the front bottom-right corner of the unit. After a system reset, the unit restores all factory default settings. NOTE: If the unit is reset while a DVD is playing, the DVD resumes play once the reset is complete. Audio Control Menu The Audio Control menu features a 7-band graphic equalizer, which allows you to easily adjust your audio system to meet the acoustical characteristics of your vehicle, which vary depending on the type of vehicle and its measurements. Proper setting of the Fader and Balance boosts the effects of the cabin equalizer. Press the AUDIO button (5) on the front panel to display the audio menu. To adjust an audio feature: 1. 2. Use the left/right joystick buttons to highlight the audio feature to be adjusted. Press the joystick ENTER button on the control panel (13) or remote control (18) to select the highlighted option. Use the joystick to adjust the selected feature to the desired setting. Mute Press the MUTE button on the front panel (8) or remote control (3) to mute the volume from the unit. Press the MUTE button again to restore the volume. “MUTE” is displayed on the LCD. Adjusting the volume or using any of the audio setup features cancels the mute function. Line Mute If the “MUTE” wire is connected, audio output mutes when a telephone call is received by the car phone. Playing Source Selection Press the SRC button on the front panel (6) or remote control (8) to change between available playing sources in the following order: RADIO, SAT, DISC, AUX1, AUX2, iPod, 3. 14 VM9412 MULTI-ZONE OPERATION Independent sources can be played simultaneously on the VM9412. For example, a video game console can be seen on the front screen while DVD video is available to rear passengers. Connecting the Rear Zone Touch Screen You can connect up to two additional monitors (sold separately) for rear passengers, one of which can be a Touch Screen. You can also connect a wireless headphone system to one of your rear monitors, as illustrated below. Rear Video Screen (Sold Separately) iPod SAT CAMERA Changing the Rear Zone Source To access the SOURCE MENU, touch the TFT screen in the top left corner of the screen. Turning the Rear Screen Off Touch the OFF button (on the SOURCE MENU) to suspend operation of the rear screen. Any operation assigned exclusively to the rear source will be suspended until reactivated using either the front or rear zone touch screen or the remote control. DISC SOURCE MENU F R O N T R E A R DISC RADIO NAV YELLOW VIDEO OUT 1 OFF AUX 1 AUX 2 MZ7TFT Touch Screen (Sold Separately) YELLOW VIDEO OUT 2 This menu allows you to select a source for the front or rear zone. Touch FRONT or REAR to choose the zone for which you would like to specify the source. Controlling the Rear Zone Screen(s) If you have a rear touch screen installed, you can touch the screen to control most rear zone functions. NOTE: The rear zone volume can only be controlled from the front. You can also use the remote control. The VM9412 remote controls both the front and rear zones. To switch from front to rear zone, move the F/R switch (32) located on the right side of the remote controller. BLACK MZ-TFT HEADPHONE MULTIZONE WHITE RED Wireless Headphone (OPTIONAL) NOTE: You cannot change or control the front zone source from the rear zone video screen. 15 VM9412 SETUP MENU To access system settings, press the SETUP button (31) on the remote control or touch the button on the screen to enter the “SETUP” menu. The “GENERAL” sub-menu appears highlighted in blue. Setting Clock Adjust Options (HH:MM) Function The clock appears in the top right corner of the screen and on the LCD screen during certain operations. NOTE: The AM/PM indication will change as you continue to adjust the hour past 12. The color signals are output in the standard NTSC format. The color signals are output in the standard PAL format. The color signal output is switched automatically based on the current video input signal - NTSC or PAL. When turned on, an audible beep tone confirms each function selection. No beep sounds. Audio Sub-menu Features Setting DRC Options Off On Function Employ the Dynamic Range Control for better playback for low volumes. Choose Stereo to send the same signal to the front and rear left/right speakers. If you have a center speaker, you can choose the Surround option when supported by your media. Optimized for music reproduction when playing music encoded in Dolby. Optimized for video reproduction when playing movies encoded in Dolby. Use with Dolby Matrix encoded media. Selecting a crossover frequency sets a cut-off frequency of the subwoofer's LPF (low-pass filter). Audio Mode Surround Stereo RADIO SETUP General Language Audio 12 Hour 04 : 31 AM AUTO On Speaker Back RDS Rating DivX Hardware P.VOL TS Cal Video Input (Input circuitry autodetects the video signal from the Aux In source). Beep NTSC PAL Auto Dolby Pro II Music Clock Mode Clock Video Input Beep On Movie Off Matrix Sub. W Filter 50Hz 80Hz 100Hz 120Hz 150Hz Language Sub-menu Features Accessing Menu Items Touch the sub-menu name or use the joystick to select a submenu (Language, Audio, RDS, etc.). The features available for adjustment under the highlighted sub-menu option will appear in the center of the screen. If a DVD supports more than 1 Subtitle or Audio language, all the languages are available for selection during playback. If the selected language is not supported by the DVD, then the default language is used. Setting OSD DVD Audio Options English English Spanish French Function On Screen Display appears in English. DVD Audio is heard in English when the option is available. DVD Audio is heard in Spanish when the option is available. DVD Audio is heard in French when the option is available. DVD subtitles automatically appear in English when available. DVD subtitles automatically appear in Spanish when available. DVD subtitles automatically appear in French when available. DVD subtitles do not appear automatically. DVD menu (if applicable) is displayed in English. DVD menu (if applicable) is displayed in Spanish. DVD menu (if applicable) is displayed in French. Adjusting a Feature 1. 2. Use the touchscreen or press the /\\ or V buttons on the joystick to select the feature to be adjusted. Enter the option field for the feature you want to adjust by using the touchscreen or pressing the ENTER (joystick) button. A submenu appears in a second row with the selected option highlighted in blue. Select a new value by using the touchscreen or pressing the /\\ or V buttons on the joystick. Use the touchscreen or press the ENTER (joystick) button to confirm setup. 3. 4. DVD Subtitle English Spanish French Off Speaker Sub-menu Features • Choose 4 CH, 4.1 CH or 5.1 CH depending on the speaker configuration in your vehicle. • Use the Test Tone feature to verify speaker settings. Make changes using the EQ/FAD-BAL menu, accessed by pressing and holding the AUDIO button (volume control). • Sub.W Phase: Reverse the subwoofer signal polarity to improve bass response related to speaker configuration. RDS Sub-menu Features Setting RDS Options On Off Function Unit will display Radio Data System information when available. General Sub-menu Features Setting Clock Mode Options 12 Hour 24 Hour Function Clock displays 12 hour time using AM and PM. Clock displays 24 hour time up to 23:59. Disc Menu English Spanish French CT On Automatically synchronize the radio’s time based on RDS radio signals. Off 16 VM9412 Setting Tuner Region Options USA Function AM Frequency Spacing - 10kHz AM Frequency Band 530kHz~1720kHz FM Frequency Spacing - 200kHz FM Frequency Band 87.5MHz~107.9MHz AM Frequency Spacing - 10kHz AM Frequency Band 530kHz~1720kHz FM Frequency Spacing - 100kHz FM Frequency Band 87.5MHz~108.0MHz AM Frequency Spacing - 9kHz AM Frequency Band 531kHz~1620kHz FM Frequency Spacing - 100kHz FM Frequency Band 87.5MHz~108.0MHz AM Frequency Spacing - 9kHz AM Frequency Band 522kHz~1620kHz FM Frequency Spacing - 100kHz FM Frequency Band 87.5MHz~108.0MHz AM Frequency Spacing - 5kHz AM Frequency Band 520kHz~1600kHz FM Frequency Spacing - 100kHz FM Frequency Band 87.5MHz~108.0MHz AM Frequency Spacing - 9kHz AM Frequency Band 522kHz~1620kHz FM Frequency Spacing - 50kHz FM Frequency Band 87.5MHz~108.0MHz AM Frequency Spacing - 9kHz AM Frequency Band 531kHz~1602kHz FM Frequency Spacing - 200kHz FM Frequency Band 88.1MHz~107.9MHz AM Frequency Spacing - 9kHz AM Frequency Band 531kHz~1602kHz FM Frequency Spacing - 200kHz FM Frequency Band 88.1MHz~107.9MHz only by entering the correct password. Once the password is entered, rating is available for setup. Setting Camera In Options Normal Mirror Function Reverse the camera image as if looking through a rear-view mirror. The TFT panel automatically opens when the unit is turned on. When the ignition is turned OFF, the TFT panel DOES NOT retract if it was previously out You must press the OPEN button (1) to open the TFT panel. TFT screen remains fully extended. TFT screen moves back slightly after opening. TFT screen brightness remains constant unless manually adjusted. TFT screen will automatically dim when less light is available. Setting Password Rating Options ______ 1. Kid Safe 2. G 3. PG 4. PG-13 5. PG-R 6. R 7. NC-17 8. Adult Function Enter the default six-digit password (012345). Select the appropriate rating level for the intended audience. You may override higher ratings by using your password. TFT Auto Open Auto Manual America 1 Off TFT Set Back Off On Auto Dimmer Off On Arabia China Load Factory Reset Select “Reset” to restore the factory default settings for the Rating system only. America 2 To reset the password, access the “RATING” menu and enter the current password. Once the correct password is entered, you can access the “Password” field and enter a new one. NOTE: Record the password and keep it in a safe place for future reference. The rating for each disc is marked on the disc, disc packing, or documentation. If the rating is not available on the disc, the parental lock feature is unavailable. Some discs restrict only portions of the disc and the appropriate content will play. For details, please refer to the disc description. DivX Sub-Menu Features Select the DivX sub-menu to view your DivX registration code. You must use this code to register your player, allowing you to purchase video using the DivX Video On Demand format. Hardware Sub-menu Features If the rear-view video camera is connected, the unit is on, and the TFT monitor is retracted inside the unit, the TFT monitor automatically moves into the viewing position and Camera mode is selected upon shifting into REVERSE gear. When shifting into DRIVE gear, the TFT monitor is retracted back inside unit. If the monitor is in display mode, the monitor automatically switches to CAMERA mode upon reverse driving. When the reverse driving stops, the monitor return to its original input mode. P.VOL Sub-menu Features Europe Setting Source Options DISC RADIO SAT iPod AUX1 AUX2 NAV Function Choose a source for which you would like to increase the relative volume (LEVEL). Use the +/- buttons to increase relative volume for specified source up to 6 decibels. Korea OIRT (International Radio and Television Organization) TS Cal (Screen Calibration) To access the “Screen Calibration” function from the SETUP menu, select the “TS CAL” option. After entering calibration mode, a crosshair appears in a corner quadrant of the screen. To begin calibration, press and hold the crosshair for one second until it moves to the next quadrant. Continue for each quadrant until the calibration is completed. Rating Sub-menu Features The DVD system has a built-in parental lock feature to prevent unauthorized persons from viewing restricted disc content. By default, the rating system is set at the highest setting (with no restrictions). The parental lock is released Exiting the System Setup Menu To exit setup mode and resume normal playback, press the SETUP button (31) on the remote control or touch the BACK button on the screen. 17 VM9412 TUNER OPERATION Tuner TFT Display 8 17 1 4 5 10 2 24 25 3 RADIO FM-1 ST P1 87.5 MHz LOC PTY RDS 01:02 PM 15. BAND: Touch to change between AM/FM bands 16. AS: Touch to automatically store stations 17. Touch to view the SOURCE MENU and select a new playback source 18. MEM: View screen used to enter current channel into preset memory 19. 1/2 or 2/2: Touch this page button to view a second page of on-screen buttons 20. : Touch to view the SETUP menu 21. PS (Preview Scan): Touch to scan all stations available, stopping for 5 seconds at each and continuing until a station is selected 22. LOC: Touch to tune to strong local stations 23. PTY: When PTY is pressed, the Program Type categories are listed, allowing listeners to find similar programming by genre. When a PTY category is selected from the touch screen menu, the radio will start scanning for the selected category. 24. Indicates the PTY function is activated 25. Indicates the RDS function is activated • • Touch the or buttons on screen. Move the joystick left/right. Direct Tuning To enter a radio station directly, touch the button or press the GOTO button (21) on the remote control to display the direct entry menu. E Q P1 P2 P3 P4 P5 P6 87.5 90.1 98.1 106.1 107.9 102.9 MHz MHz MHz MHz MHz MHz FM: _ _ _ . _ MHz 1 4 7 0 2 5 8 3 Exit AS 6 9 Enter PS: BAND 1/2 PS Clear 6 7 9 20 14 Switch to Radio Tuner source • • 23 MEM 2/2 LOC 11 13 BAND AS 12 PTY Touch the top left corner of the screen (the RADIO circle) to view the SOURCE MENU. Touch “RADIO”. Press the SRC button (6) on the front panel or remote control (8) to switch to the AM/FM or RADIO source. Enter the desired radio station using the on-screen number pad. Press Enter to tune to the selected station. To exit the screen without changing the station, touch Exit. To clear your entry and start over, touch Clear. Using Preset Stations Six numbered preset buttons store and recall stations for each band. All six stored stations (P1-P6) for the current band appear on the screen. Storing a Station 1. Select a band (if needed), then select a station. 2. Press the 1/2 button (19) to view the second page of menu options. 3. Touch the on-screen MEM button (18) to open the preset screen. 16 1/2 PS Select FM/AM Band Touch the BAND button (15) on the screen, or press the BAND button on the unit (4) or remote control (20) to change between the following bands: FM1, FM2, FM3, AM1, and AM2. NOTE: The BAND button on the unit only works when the TFT is closed. 15 19 21 18 22 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. Current radio band indicator Radio frequency indicator Clock Stereo broadcasting indicator Strong Local signal broadcasting indicator Preset radio stations: Touch to recall preset stations RDS Information: PS (Program Service), PTY (Program Type), RT (Radio Text) Touch for quick access to Equalizer level settings Touch to access the direct entry screen Current preset station indicator |<<: Touch to seek backward >>|: Touch to seek forward <<: Touch to tune backward one step >>: Touch to tune forward one step Seek Tuning To seek the next higher station: • • • • Touch the >>| button on screen. Move the joystick to the right. Touch the |<<| button on screen. Move the joystick to the left. 4. Mem: _ P1 P2 P3 P4 P5 P6 Exit Touch the preset number in which you would like to store the current station (or press EXIT to cancel and To seek the next lower station: Manual Tuning To increase or decrease the tuning frequency one step: 18 VM9412 close the menu). The preset number and station appears highlighted. Recalling a Station 1. Select a band (if needed). 2. Touch an on-screen preset button (6) to select the corresponding stored station. P1 P2 P3 P4 P5 P6 87.5 90.1 98.1 106.1 107.9 102.9 MHz MHz MHz MHz MHz MHz Auto Store (AS) To select six strong stations and store them in the current band: 1. 2. Select a band (if needed). Press the AS button (3) on the control panel or touch AS on the screen for 2 seconds to activate the Auto Store function. The new stations replace stations already stored in that band. Preview Scan (PS) To scan the AM or FM band for a preview of available stations in your particular area, touch the PS button (21) on page two of the on-screen controls. Touch again to stop preview scan. Local Radio Station Seeking (LOC) When the Local function is on, only radio stations with a strong local radio signal are played. To activate the Local function in AM/FM tuner mode, touch the 1/2 button to access the second screen of menu options, and then touch the onscreen LOC button. Touch the LOC button again to turn Local off. When the Local function is active, the LOC indicator at the top of the screen is illuminated. 19 VM9412 SATELLITE RADIO OPERATION Listeners can subscribe to XM® Radio on the Web by visiting www.xmradio.com, or by calling (800) 967-2346. Customers should have their Radio ID ready (see “Displaying the Identification (ID) Code”). Customers can receive a limited number of free-to-air channels without activation. 13. 14. 15. 16. CAT -: Select previous channel in current category only Touch to enter channel directly using keypad on screen CG: Access Channel/Category Guide mode BAND: Change between SAT1, SAT2 and SAT3 bands 3. Touch the preset number in which you would like to store the current station (or press EXIT to cancel and close the menu). The preset number and station appears highlighted. Listeners can subscribe to Sirius® Radio on the Web by visiting www.sirius.com, or by calling (888) 539-SIRIUS. Customers should have their Sirius ID ready (Sirius ID is located on the Satellite Radio Tuner, sold separately). Customers can listen to music samples by tuning to channel 184. 17. : Touch to view the SETUP menu 18. Touch this area to view the SOURCE MENU and select a new playback source 19. MEM: View screen used to enter current channel into preset memory 20. DIAG: This feature is reserved for use by service professionals for troubleshooting. Recalling a Station 1. Select a band (if needed). 2. Touch an on-screen preset button to select the corresponding stored station. Direct Tuning To enter a radio station directly, touch the button or press the GOTO button (21) on the remote control to display the direct entry menu. Displaying the Identification (ID) Code Before you listen to satellite radio, you must subscribe to the service using your radio’s identification number. To display the radio ID, press the left/right buttons (16, 17) on the joystick or the CH - or CH + buttons on the touch screen repeatedly to tune to channel “000”. The screen displays the radio ID where the channel name is usually displayed. Accessing Satellite Radio Mode Press the SRC button (8) on the front panel or remote control (8) to switch to the SAT source. 18 CH NO: _ _ _ /255 1 4 7 0 2 5 8 3 Exit 1 3 2 7 8 4 6 9 Enter SAT E Q SAT1 XM Preview XM Preview CH001 Preview 01:02 17 Selecting a Station Use the left/right joystick buttons or the CH - or CH + buttons on the touch screen to change to another station. Clear P1 P2 P3 P4 P5 14 XM Preview XM Preview CH Preset Mode To enter preset mode, touch the BAND button on the screen, or press the BAND button on the unit (14) or remote control (20) to change between the following bands: SAT1, SAT2, or SAT3 (indicated in the top left corner of the TFT screen). Six numbered preset buttons store and recall stations for each band. All six stored stations (P1-P6) for the current band appear on the TFT screen. Storing a Station 1. Select a band (if needed), then select a station. 2. Touch the on-screen MEM button (18) to open the preset screen. Mem: CAT + 12 CH XM Preview XM Preview - CG CAT + 11 15 - Enter the desired radio station using the on-screen number pad. Touch the Enter button to tune to the selected station. To exit the screen without changing the station, touch Exit. To clear your entry and start over, touch Clear. Title: Fridays XM144! BAND MEM DIAG 13 Channel/Category Guide Mode There are two search modes to help navigate through channels and or categories. To access the Channel/Category Guide mode, press the ENTER button (18) on the remote control or the CG button on the touch screen. Channel Guide is the default search mode. To access Category Guide, press the TITLE button (2) on the remote control or touch CAT on the touch screen. To return to Channel Guide, touch CH on the screen or press the SUBTITLE button (9) on the remote control. Channel Guide Mode When Channel Guide mode is selected, the first six satellite channels are displayed in the boxes in the bottom left of the TFT screen and the on-screen menu changes to facilitate search mode. 5 6 9 10 16 19 20 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. SAT channel name SAT channel number SAT band Time Song title Artist name Song category Signal strength indicator Current preset channels/on-screen preset buttons CH -: Select the previous channel CH +: Select the next channel CAT +: Select next channel in current category only P1 P2 P3 P4 P5 P6 Exit 20 VM9412 SAT E Q SAT1 XM Preview CH001 Preview 01:02 ######## 001 XM Preview 004 The 40s 005 The 50s 006 The 60s 007 The 70s CH CG CAT Title: www.xmradio.com SCN MEM DIAG • • • • • While in Search Mode, to switch between Channel and Category search modes, press the CH or CAT buttons on the touch screen. Use the scroll bar and arrows on the touch screen to view the next/previous page of stations. Each page contains six channels to select from. Press the on-screen SCN button to preview each of the 6 channels displayed for 10 seconds. Press the CG button to return to the Preset Mode screen. To select a channel while in Channel Guide mode, touch the channel name on the screen. The channel will begin playing and the unit will return to the Preset Mode. Category Guide Mode When Category Mode is selected, folder icons appear on the screen next to category choices. • While in Search Mode, to switch between Channel and Category search modes, press the CH or CAT buttons on the touch screen. Use the scroll bar and arrows on the touch screen to view the next/previous page of categories. Each page contains six categories to select from. To select a category, touch the corresponding category name or folder icon. The channels in that category will be displayed on the screen. Use the scroll bar and arrows on the touch screen to view the next/previous six stations in the selected category. Touch the on-screen SCN button to preview each channel in the selected category for 10 seconds. Touch the channel name to play that channel. Touch the on-screen CG button to return to the Preset Mode screen. • • • • • • 21 VM9412 DVD/VCD VIDEO OPERATION Controlling Playback NOTE: When properly installed, DVD video cannot be displayed on the main TFT screen unless the parking brake is applied. If you attempt to play a DVD while the vehicle is moving, the TFT screen displays “PARKING” with a blue background. Rear video screens, if applicable, will operate normally. To access the on-screen controls, touch the screen. Touch the 1/2 button to view a second page of controls NOTE: For VCD play, the repeat function is not available if PBC is on. Sectional Repeat Function (A-B) BACK EQ BACK Use the A-B function to define a specific area of a disc to repeat. • Press the RPT A-B button (6) on the remote control (or the A-B button on screen) to set the start point (A) of the repeated section. Press the RPT A-B button again once you reach the desired end point (B) of the repeated section. The selected portion of the DVD will now repeat continuously. Press the RPT A-B button again to cancel the A-B section setting and stop repeat play. Opening/Closing the TFT Video Screen Opening the TFT Screen To open the TFT video screen, press the OPEN button (1). The unit beeps and then opens. Closing the TFT Screen Press the OPEN button (1) again to close the TFT screen. If the screen is in the “IN” position, it moves out before closing. AUDIO A-B • SUBTITLE • Insert/Eject Disc Upon inserting a DVD disc, DVD mode is entered and disc play begins. NOTE: If Parental Lock (Rating) is activated and the disc inserted is not authorized, the 6-digit code must be entered and/or the disc must be authorized (see “General Sub-menu Features” on page 16). You cannot insert a disc if there is already a disc in the unit or if the power is off. NOTE: DVD-R and DVD-RW will not play unless the recording session is finalized and the DVD is closed. 1/2 MENU TITLE 2/2 DISP Random Playback Stopping Playback Touch the stop button ( ) on the screen or press the / BAND button (20) on the remote control to stop DVD play. Pausing Playback Touch the pause button (||) on the screen (or press the >/|| button on the remote control) to suspend disc playback. Press the > button on the screen to resume disc playback. Fast Forward Playback Press the /\\ button on the joystick or the >> button on the screen to fast forward. Keep pressing and releasing the button to increase the rate from “2X” to “4X”, “6X”, and “8X”. Press the joystick enter button (18) on the remote control or touch the play button (>) to resume normal playback. Fast Reverse Playback Press the \\/ joystick button or touch the << button on the screen to play the current title in fast reverse. Keep pressing and releasing the button to increase the rate from “2X” to “4X”, “6X”, and “8X”. Press the joystick ENTER button (18) on the remote control or touch the play button (>) to resume normal playback. Repeat Playback Press the RPT button (19) on the control panel, the RPT button (7) on the remote control, or the button on screen to alter repeat mode according to the following: • • DVD: Repeat Chapter, Repeat Title, Repeat Off VCD (PBC Off): Repeat Single, Repeat Off With a DVD, VCD, or CD playing, press the RDM button on the control panel (21) or remote control (33) to activate random playback and play all chapters/tracks in random order. “On” appears on the screen. Press the > button on the joystick to play the next random track. Press the RDM button again to turn random play off. NOTE: When a VCD is playing with PBC turned “On”, activating random playback automatically turns PBC off. Accessing the DVD Menu Press the MENU button (1) on the remote control to recall the main DVD menu. Use the joystick to select a title from the menu or touch the title on screen. Press the TITLE button (2) on the remote control or on screen to select a different title for playback. Press the ENTER (joystick) button to confirm your selection and begin playback. You can also select a title using the touch screen. Ejecting a Disc Press the button (21) on the unit or remote control (35) to eject the disc. The unit automatically reverts to Tuner mode. You may eject a disc with the unit powered off. The unit will remain off after the disc is ejected. Reset the Loading Mechanism If the disc loads abnormally or an abnormal core mechanism operation occurs, press and hold the button (21) on the unit or remote control (35) to reset the loading mechanism. Normal operation resumes. Moving Through Chapters Press the > button on the joystick or the >>| button on screen to advance to the next chapter on the DVD. Press the < button on the joystick or the |<< button on screen to move to the previous chapter. Accessing DVD Mode To switch to DVD mode when a disc is already inserted, press the SRC button (15) on the front panel or remote control (8) until “DISC” appears at the bottom of the screen. 22 VM9412 Direct Chapter / Track Selection Remote Control Direct Entry During DVD, VCD and CD playback, you can use the numeric keypad on the remote control (29) to access a track directly. Zooming Press the PRESET /\\ and \\/ buttons (11, 12) on the remote control to enlarge and pan through the video image using the following options: “ZOOM 1.5”, “ZOOM 2”, “ZOOM 3”, and “OFF”. • 00:41:28 – “00:41:28” indicates the playback time of the current title. The following information is displayed at the bottom of the screen: • • • Front: Source Rear: Source CLOCK Multi-Language Discs (DVD Only) Changing Audio Language If you are watching a disc recorded in multiple languages, press the AUDIO button (5) on the remote control to choose a language. Changing Subtitle Language If you are watching a disc recorded in multiple languages with subtitles, press the SUBTITLE button (9) on the remote control to choose the language in which you would like the subtitles to appear. NOTE: During VCD playback, press the AUDIO button (5) on the remote control to choose between Left Channel, Right Channel, and Stereo. VCD Playback Information The following information is displayed at the top of the screen during VCD playback: • • • VCD2.0 – Format of current disc. Title: 06/18 – “06/18” indicates the sixth of 18 tracks on the VCD is currently playing. 00:02:18 – “00:02:18” indicates the playback time of the current track. Touch Screen Direct Entry To select a title, chapter/track, or specific playback time directly, touch the direct entry menu. button on screen control to display the Chapter: _ _ PBC (Play Back Control - VCD Only) Exit 1 4 7 0 2 5 8 3 6 9 Enter For VCDs with play back functionality, play back control (PBC) provides additional controls for VCD playback. Press the MENU button (1) on the remote control to toggle the PBC function “On”/”Off”. Once PBC is on, playback starts from track 1 of the play list. NOTE: When PBC is activated, fast forward, slow playback, and previous/next track are available. Repeat and direct track selection are not available. When PBC is activated, selecting random, scan, or search playback automatically deactivates PBC. Clear Use the • • • button to select Title, Chapter, or Time entry. Title: _/# Chapter: _ _/## Time: _ _:_ _:_ _ Playback Information During DVD and VCD playback, press the DISP button on the control panel (2) or remote control (10) to display playback information on the screen, including the media playing and current playback time. DVD Playback Information The following information is displayed at the top of the screen during DVD playback: • • Title: 05/08 – “05/08" indicates the fifth of 8 titles on the DVD is currently playing. Chapter: 012/016 – “002/016" indicates that the second of 16 titles on the DVD is currently playing. Enter the desired title, chapter/track, or time using the onscreen number pad and then press the Enter button. To exit the screen without making a selection, touch Exit. To clear your entry and start over, touch Clear. Viewing an Alternate Picture Angle (DVD Only) Some DVDs contain scenes that have been shot simultaneously from different angles. For discs recorded with multiple angles, press the ANGLE button (13) on the remote control to toggle available angles of the on-screen image. 23 VM9412 General Disc Information Table 5: Disc Properties Symb ol 12cm Disc Properties Single side single layer (DVD-5) Single side double layer (DVD-9) Double side single layer (DVD-10) Double side double layer (DVD-18) Max Play Time (MPEG 2 Method) 133 minutes 242 minutes 266 minutes 484 minutes (MPEG 1 Method) 74 minutes 74 minutes Single side single layer (VCD) Single side single layer Table 6: Disc Symbols Symbol Meaning Number of voice languages recorded. The number inside the icon indicates the number of languages on the disc (maximum of 8). Number of subtitle languages available on the disc (maximum of 32). Number of angles provided (maximum of 9). Aspect ratios available. “LB” stands for Letter Box and “PS” stands for Pan/Scan. In the example on the left, the 16:9 video can be converted to Letter Box video. Indicates the region code where the disc can be played. • Region 1: USA, Canada, East Pacific Ocean Islands • Region 2: Japan, Western Europe, Northern Europe, Egypt, South Africa, Middle East • Region 3: Taiwan, Hong Kong, South Korea, Thailand, Indonesia, South-East Asia • Region 4: Australia, New Zealand, Middle and South America, South Pacific Ocean Islands/ Oceania • Region 5: Russia, Mongolia, India, Middle Asia, Eastern Europe, North Korea, North Africa, North-West Asia • Region 6: Mainland China • ALL: All regions 24 VM9412 DVD/CD AUDIO OPERATION Instructions for TFT control and Insert/Eject are the same for DVD and CD operation. Please see the DVD/Disc Video Operation section for information about these topics. The VM9412 will play music or other audio files from the following disc media: • • • • • CD-DA CD-R/RW DVD DVD+R/RW DVD-R/RW 14. Touch to access the direct entry screen 15. : Touch to view the SETUP menu 16. Touch for quick access to Equalizer level settings 17. Touch to view the SOURCE MENU and select a new playback source Fast Forward Touch the >> button on screen or press the /\\ button on the joystick to fast forward. Keep pressing and releasing the button to increase the rate from “2X” to “4X”, “6X”, and “8X”. Controlling Playback Stopping Playback Touch the button on screen or press the the remote control to stop disc playback. To resume playback, touch the the joystick button. Pausing Playback Touch the button on screen or press the joystick button to suspend or resume disc playback. Moving Through Tracks Press the >>| button (19) on the remote control or on screen or use the > button on the joystick to advance to the next track on the disc. Press the |<< button (17) on the remote control or on screen or use the < button on the joystick to move to the previous track. 14 Direct Track Entry To select a track directly, touch the display the direct entry menu. button on screen to button (20) on Upon inserting a disc with the TFT screen open, the disc and track title (if available), along with the track number and playing time appear on the screen. TRACK: _ _ _ button on screen or press 1 4 7 0 2 5 8 3 Exit CD Player User Interface The on-screen indicators and touch key areas for CD playback are outlined below. 16 17 1 2 15 3 6 9 Enter Clear DISC E Q 01:02 CD 1/10 Track Track Track Track Track Track 01 02 03 04 05 06 01:23 04:31 1 2 3 4 5 6 Repeat Playback Touch the button on screen, press the RPT button on the remote control (7) control panel (19) to alter repeat mode according to the following: • • • • DVD: Repeat Chapter, Repeat Title, Repeat Off CD-DA: Repeat One, Repeat All, Repeat Off CD-R/RW: Repeat One, Repeat All, Repeat Off DVD-R/RW: Repeat One, Repeat All, Repeat Off Enter the desired track number using the on-screen number pad, and then press the Enter button. To exit the screen without making a selection, touch Exit. To clear your entry and start over, touch Clear. 10 8 6 4 5 9 11 7 12 13 Track Scan Select (CD-DA discs only) During disc play, press the SCN button on the remote control (34) or control panel (20) to play the first 10 seconds of each track. When a desired track is reached, press the SCN button again to cancel the function and play the selected track. Random Play Select While disc play is stopped, touch the button on screen or the RDM button on the remote control (33) or control panel (21) to play the tracks on the disc in a random, shuffled order. Touch the (RDM) button again to cancel Random Play mode. NOTE: CD-R and CD-RW will not play unless the recording session is finalized. 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. Current track and total number of tracks on disc Elapsed playing time/length of track Current time Track titles Disc title ||: Touch to pause/play disc playback : Touch to stop disc playback >>|: Touch to move to next track |<<: Touch to move to previous track >>: Touch to fast forward current track <<: Touch to rewind current track Touch to activate/deactivate Repeat play mode Touch to activate/deactivate Random mode 25 VM9412 MP3/WMA/iPod OPERATION Instructions for TFT control and Insert/Eject are the same for DVD and MP3 operation. Please see the DVD/Disc Video Operation section for information about these topics. MP3 Playing Order When selected for play, files and folders (Folder Search, File Search or Folder Select) are accessed in the order they were written by the CD writer. As a result, the order in which they are expected to be played may not match the order in which they are actually played. You may be able to set the order in which MP3/WMA files are to be played by writing them onto a medium such as a CD-R with their file names beginning with play sequence numbers such as "01" to "99". For example, a medium with the following folder/file hierarchy is subject to Folder Search, File Search or Folder Select, as shown below. MP3/iPod User Interface The on-screen indicators and touch key areas for MP3 playback are outlined below. 16 17 18 1 2 MP3/WMA Media and File Requirements This player allows you to play back MP3 and WMA files recorded onto CD-R/RWs, DVD+R/RWs, and DVD-R/RWs. For CD-RW discs, please make sure it is formatted using the full method and not the quick method to prevent illegal disc operation. Up to 1500 songs/files can be burned onto a disc for a MEGA DVD music mix. Do not exceed this number of songs/files or disc readability problems may occur. MP3 Format Compatibility The file naming formats listed below are compatible with this unit: • • • ISO 9660 – file name: 12 characters, file extension: 3 characters ISO 9660 – file name: 31 characters, file extension: 3 characters Joliet – 64 characters 20 14 3 DISC E Q (Root) 01:02 AM 00:00:23 15 MP3 4/84 1 2 3 4 5 6 Cherry Poppin Da Chris Isaak - Baby Crazy Town - Butt Phish - Birds Of A Phish - Bouncin' R Phish - Freebird (L 1/2 10 8 6 4 5 9 11 7 19 20 24 22 23 ALL DIR 2/2 If the file or folder name does not conform to ISO 9660 file system standards, it may not be displayed or played back correctly. Use the following settings when compressing audio data for your MP3 disc: • • Transfer Bit Rate: 128kbps Sampling Frequency: 48kHz DIR + When recording MP3 up to the maximum disc capacity, disable additional writing. For recording on an empty disc up to maximum disc capacity, use the "Disc at once" setting. The VM9412 player will only recognize three folder levels and does not display folders containing only other folders. In the example above, the unit will display folders 3, 4, 6, and 8, but not 2 and 7 since they do not contain any tracks directly. Folder 5 is not recognized at all since it is at the fourth level. 12 13 25 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. Current track and total number of tracks on root of disc Elapsed playing time Current time Track titles ID3 information || : Touch to play/pause disc playback : Touch to stop disc playback >>|: Touch to move to next track |<<: Touch to move to previous track >>: Touch to fast forward <<: Touch to fast rewind/reverse DIR -: Touch to view the previous folder DIR +: Touch to view the next folder Touch to access the direct entry screen : Touch to view the SETUP menu 26 VM9412 16. Touch for quick access to Equalizer level settings 17. Touch to view the SOURCE MENU and select a new playback source 18. Folder name 19. 1/2 or 2/2: Touch this page button to view a second page of on-screen buttons 20. Touch the scroll bar and arrows to view the previous/ next page of songs 21. Touch to activate/deactivate Repeat play mode 22. Touch to access the Music menu 23. Touch to access the Video menu 24. Touch to access the Photo menu 25. Browse all files Random Play Select Press the RDM button (33) on the remote control to play the files on the disc in a random, shuffled order. Press RDM again to cancel Random Play mode. NOTE: CD-R and CD-RW will not play unless the recording session is finalized. Fast Forward/Fast Reverse Press and hold the |<< or >>| buttons on screen or on the remote control (17, 19) for 1 second and continue to hold for fast forward or fast reverse. Release to resume normal playback. Search Playlist/Artist/Album/Song To search through Playlists, Artists, Albums and Songs, press the 1 button (29) on the remote control keypad while in one of the following directories: Playlist, Artist, Album or Song. The selected directory will be accessed with the number of pages and files in that directory displayed at the top of the page. To access the page or file, enter the page or file number directly from the remote control keypad. Press the |<< or >>| button (17, 19) on the remote control or the < or > button (16, 17) on the joystick to select the desired song or file. Photo Playback While iPod photos can be viewed on the VM9412 screen, you must use the iPod to control photo playback options. Touch the icon on screen or press the MENU button (1) on the remote control to access the iPod PHOTO mode. The VM9412 will release control back to the iPod so you can select video media to be displayed on the TFT monitor. To exit PHOTO mode, touch the screen. Video Playback While iPod video can be viewed on the VM9412 screen, you must use the iPod to control video playback options. button on screen or press the AUDIO button Touch the (5) on the remote control to access iPod VIDEO mode. The VM9412 will release control back to the iPod so you can select video media to be displayed on the TFT monitor. To exit VIDEO mode, touch the screen, press the >> button (14) on the remote control, or press the MENU button on the iPod. NOTE: To transmit the video from your iPod to the VM9412 screen, you must set the following options through the iPod video settings menu: TV Out = On, TV Signal = NTSC, and Widescreen = On. Controlling your iPod The unit will automatically switch to iPod mode when an iPod is plugged into the MediaLink3. To return to the iPod menu from any other source menu, press the SRC button (6) on the front panel or remote control (8) until the iPod menu appears on the screen. NOTE: Be sure your iPod has the latest Apple firmware installed to avoid connectivity issues. The following touch screen icons and remote control buttons are used to access the iPod menus: Menu Music Photos Videos Controlling MP3/WMA Disc Playback Playing MP3/WMA Files After inserting a MP3/WMA disc, files will play in the sequence of the “Root’ directory. NOTE: When burning MP3 / WMA files onto a DVD disc, use the 2X or 4X burning option, if available. This slower burning speed will help eliminate buffer errors and increase disc reading reliability. Also, use folders when burning large numbers of songs / files to a disc for easy music navigation. Select the "Disc at Once" option and close your disc. Stopping Playback Touch the button on screen or press the /BAND button (20) on the remote control to stop disc playback. To resume playback, touch the button on screen, press the joystick button (13) on the front panel, or press the >/|| button (18) on the remote control. Pausing Playback Touch the button on screen, press the joystick button (13) on the front panel, or press the >/|| button (18) on the remote control to suspend or resume disc playback. Moving Through Tracks Press the >>| button (19) on the remote control or on screen or use the > button on the joystick (14) to advance to the next track on the disc. Press the |<< button (17) on the remote control or on screen or use the < button on the joystick (10) to move to the previous track. Repeat Playback Touch the button on screen or press the RPT button (7) on the remote control to alter repeat mode according to the following: Repeat Single, Folder Repeat, Repeat Off. Touch Screen Remote Control TITLE MENU AUDIO Use the touchscreen, the joystick, or the directional keys on the remote control to navigate the iPod menus. iPod Music Playback To access iPod music files, touch the button on screen or press the TITLE button (2) on the remote control. • • Touch the > || button on screen to play/pause. Touch >>| on screen, press the >>| button (19) on the remote control, or press the > button on the joystick (17) to move to the next item on the menu. Touch |<< on screen, press the |<< button (17) on the remote control, or press the < button on the joystick (16) to move to the previous item on the menu. Use the touch screen or press the >/|| button (18) on the remote control or the joystick ENTER button (20) on the control panel to select the highlighted menu option. Press the >> button (14) on the remote control or the /\\ button (18) on the joystick, or touch the MENU button on screen to return to the previous menu. • • NOTE: After disconnecting your iPod, the VM9412 will always return to the last mode accessed when the iPod is plugged back into the unit. • 27 VM9412 Direct Track/File Entry To select a track/file directly, touch the control to display the direct entry menu. button on screen TRACK: _ _ _ 1 4 7 0 2 5 8 3 Exit 6 9 Enter Clear Enter the desired track/file using the on-screen number pad. Press the Enter button to tune to the selected station. To exit the screen without changing the station, touch Exit. To clear your entry and start over, touch Clear. You can also use the numeric keypad (29) on the remote control to access files directly. 28 VM9412 TROUBLESHOOTING Table 7: Troubleshooting Problem GENERAL Unit will not power on Radio Fuse blown Car battery fuse blown Illegal operation Remote control does not function Battery depleted Cause Install new fuse with correct rating Install new fuse with correct rating Corrective Action Press the RESET button located in the bottom right corner of the front panel Replace battery with new one Remove battery and install correctly Check wiring and correct Increase volume level Review wiring diagram and check “MUTE” connection Replace speakers Adjust the channel balance to the center position Insulate all speaker wiring connections Use original copy Connect proper speakers Check speaker contact Check that the “MUTE” connection is not grounded and that it’s properly insulated Check wiring and correct Battery installed incorrectly No/low audio output Improper audio output connection Volume set too low Improper “MUTE” connection Speakers damaged Heavily biased volume balance Speaker wiring is in contact with metal part of car Poor sound quality or distortion Pirated disc is in use Speaker power rating not compatible with unit Speaker is shorted Tel-Mute malfunction Unit resets itself when engine is off TFT MONITOR Monitor does not open automatically No image TFT Auto Open is turned off Incorrect connection to parking brake wire PRK SW is activated and parking brake is not engaged Flashing image or interference appears on screen DVD is not compatible with current TV system settings Improper video signal connections Prolonged image or improper height/width ratio display Monitor stops at incorrect position TUNER Weak station searching Auto antenna is not fully extended Auto antenna not properly connected LOCAL function is activated Cannot insert disc Disc already inside unit Improper aspect ratio setup Moving path is blocked “MUTE” wire is grounded Incorrect connection between ACC and positive battery wire Turn TFT Auto Open on Check wiring and correct Stop vehicle in safe place and apply parking brake Change setup to accommodate disc Check wiring and correct Use correct aspect ratio setting Press OPEN key to restart monitor movement Connect the auto antenna control cable properly Connect the auto antenna control cable properly Turn LOCAL function off Eject current disc and insert new one 29 VM9412 Table 7: Troubleshooting Problem Disc does not play back Disc is dirty or wet Laser pickup is dirty Cause Disc is warped or scratched Use disc in good condition Clean disc with soft cloth Clean laser pickup with cleaning disc Use compatible disc Corrective Action Incompatible disc is used Disc rating exceeds Parental Lock rating limit Disc region code is not compatible with unit Disc is inserted upside down Image blurred, distorted, or dark PBC cannot be used during VCD playback No repeat or searching while playing VCD MP3 Interruption occurred during playback Disc is dirty or scratched File is damaged/bad recording Incorrect playback message displayed SAT RADIO No Sound Satellite source not available IPOD iPod source not available Cannot see video and photo media on TFT screen Incorrect cable connections Wrong iPod Video Settings Incorrect cable connections Incorrect cable connections Message is longer than LCD can display Disc is illegally copied PCB is not available on the disc PCB is on Change Parental Lock settings to lower restriction Use disc with proper region code Insert disc with label side up Use original disc Turn PCB off Clean disc or replace Recreate disc with good files Check RCA cables Check Satellite Data cable Check jLink and MediaLink cables Change iPod video settings to TV Out = On Error Messages Table 8: Error Messages Message Displayed Loading No Disc Disc is being read Disc is dirty Disc is upside down Cause Clean disc with soft cloth Insert disc with label side up Insert disc Clean disc with soft cloth Insert disc with label side up Corrective Action Disc not present in loading compartment Bad Disc Disc is dirty Disc is upside down Unknown disc Region Error Error Disc format is not compatible with this unit DVD is not compatible with region code of unit Illegal mechanism operation Press EJECT key for 5 seconds to reset loading mechanism 30 VM9412 Care and Maintenance 1. Use only a clean silicone cloth and neutral detergent to clean the front panel or monitor. A rough cloth and nonneutral detergent (such as alcohol) may result in scratching or discoloration. Do not get water or cleaning fluids on the unit. If the temperature inside the player gets too hot, a protective circuit automatically stops play of the disc. If this occurs, allow the unit to cool before operating the player again. Never insert anything other than a 5” (12 cm) disc into the player as the mechanism can be damaged by foreign objects. Do not attempt to use a 3” (8 cm) CD-Single disc in this unit, either with or without an adaptor, as damage to the player and/or disc may occur. Such damage is not covered by the Warranty on this product. The CD player may not operate properly in extreme hot or cold. If such conditions occur, allow the interior of the vehicle to reach a normal temperature before using player. When the vehicle warms up during cold weather or under damp conditions, condensation may appear on the LCD panel. Should this occur, the screen will not operate properly until the moisture has evaporated. We suggest you use a cleaning disc in this unit more frequently than in the unit in your home due to the environmental conditions of the vehicle. 2. 3. 4. 5. 6. 7. 8. 31 VM9412 SPECIFICATIONS DVD/CD Player Compatible Disc Media: DVD +/- R/RW (Single and Dual Layer) and CD-R / RW Compatible Media Formats: CD-DA, MP3, WMA, VCD, SVCD, AVI, MPEG1 / 2, XviD, DivX and Kodak picture CD (JPEG). Signal to Noise Ratio: >95dBA Dynamic Range: >95dB Frequency Response: 20Hz to 20 kHz, -3dB Channel Separation: > 60dB @ 1 kHz D/A Converter: High performance 24-bit / 192 kHz sample rate, Multi-Bit Sigma-Delta Modulator Video Format: NTSC, PAL (auto-detection) Output: 1Vp-p (75-ohm) Input: 1Vp-p (75-ohm) FM Tuner Mono Sensitivity (-30dB): 9dBf Quieting Sensitivity (-50dB): 15dBf Alternate Channel Selectivity: 70dB Signal to Noise Ratio @ 1 kHz: 58dB Image Rejection: 80dB Stereo Separation @ 1 kHz: >30dB Frequency Response: 30Hz - 15 kHz, -3dB AM Tuner Sensitivity (-20dB): 15uV Signal to Noise Ratio @ 1 kHz: 50dB Image Rejection: 60dB Frequency Response: 50Hz - 2 kHz, -3dB Monitor Screen Size: 7.0" (Measured diagonally), 16:9 Widescreen • 6.06" (154.1mm) W X 3.42" (87mm) H Screen Type: TFT Liquid Crystal Display (LCD) active matrix Response Time: 30mSec rise time, 50mSec fall time Resolution: • 336,960 sub pixels, 1440 (W) X 234 (H) Viewing angle: • 65 degrees left or right • 40 degrees up • 65 degrees down General Auxiliary Input Impedance: 10k-ohm Power Supply: 11 to 16VDC, negative ground Power Antenna (Blue): 500mA max, current limited protection Amplifier Remote (Blue/White): 500mA max, current limited protection Operating Temperature: -20C ~ 65C Fuse: 15-amp, mini ATM type DIN chassis dimensions: 7" X 7" X 2" (178mm x 178mm x 50mm) CEA Power Ratings Power Output: 13 Watts RMS x 4 channels into 4-Ohms @ < 1% THD+N Signal to Noise Ratio: 70dBA below reference (Reference: 1 Watt, 4-Ohms) Frequency Response: 20 Hz - 20 kHz, -3dB. (Aux Input used as reference input) Reference Supply Voltage: 14.4VDC *Specifications subject to change without notice. 32 Limited Warranty CD or Multimedia Radios/Headunits Audiovox Electronics Corporation (“the Company”) is committed to quality and customer service, and are pleased to offer you this Warranty. Please read it thoroughly and contact the Company at 1-800323-4815 with any questions. Who is covered? The Company extends this warranty to the original retail purchaser of products purchased through an authorized Audiovox retailer in the U.S.A., Puerto Rico or Canada. This warranty is not transferable or assignable. Proof of purchase is required in the form of an original sales receipt. What is covered? The Company warrants that should this product or any part thereof, under normal use, be proven defective in material or workmanship within 12 months from the date of original purchase, such defect(s) will be repaired or replaced with a new or reconditioned product (at the Company's option) without charge for parts and repair labor. What is not covered? This Warranty does not cover the following: • Damage incurred during shipping or transporting the product to the Company or a service center • Elimination of car static or motor noise • Defects in cosmetic, decorative or non-operative structural parts • Correction of antenna problems • Costs incurred for installation, removal or reinstallation of the product • Consequential damage to compact discs, USB devices, digital media cards, accessories or vehicle electrical systems • Damage caused by improper installation, mishandling, misuse, neglect, accident, blown fuse, battery leakage, theft or improper storage • Products whose factory serial number/bar code label(s) or markings have been removed or defaced • Damage resulting from moisture, humidity, excessive temperature, extreme environmental conditions or external natural causes Please review the “Care and Maintenance” section of your Installation and Operation Manual for additional information regarding the proper use of your product. DO NOT RETURN THIS PRODUCT TO THE STORE Limitations THE EXTENT OF THE COMPANY'S LIABILITY UNDER THIS WARRANTY IS LIMITED TO THE REPAIR OR REPLACEMENT PROVIDED ABOVE AND, IN NO EVENT, SHALL THE COMPANY'S LIABILITY EXCEED THE PURCHASE PRICE PAID BY PURCHASER FOR THE PRODUCT. This Warranty is in lieu of all other express warranties or liabilities. ANY IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, SHALL BE LIMITED TO THE DURATION OF THIS WRITTEN WARRANTY. ANY ACTION FOR BREACH OF ANY WARRANTY HEREUNDER INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY MUST BE BROUGHT WITHIN A PERIOD OF 24 MONTHS FROM DATE OF ORIGINAL PURCHASE. IN NO CASE SHALL THE COMPANY BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES FOR BREACH OF THIS OR ANY OTHER WARRANTY, EXPRESS OR IMPLIED, WHATSOEVER. No person or representative is authorized to assume for the Company any liability other than expressed herein in connection with the sale of this product. Some states do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of incidental or consequential damage so the above limitations or exclusions may not apply to you. This Warranty gives you specific legal rights and you may also have other rights which vary from state to state. Obtaining Warranty Service • To obtain repair or replacement within the terms of this Warranty, call 1-800-323-4815 for the location of a warranty station serving your area. • You must prepay the initial shipping charges to the Company. The Company will pay the return shipping charges for all warranteed products returned to an address within the U.S.A., Puerto Rico or Canada. • Please package the product securely to avoid shipping damage. We recommend using a carrier that provides tracking service to prevent lost packages. Lost or damaged packages are not covered by this warranty. • Provide a detailed description of the problem(s) for which you require service. Audiovox Electronics Corporation Hauppauge, NY 11788 Technical Assistance: 1-800-323-4815 www.jensen.com © 2007 Audiovox Ver. 032907 Printed in China
View and Download Jensen VM9414 installation manual online. Jensen Car Stereo System Installation Guide. VM9414 Car Stereo System pdf manual download.
VM9412